CLEANING TOOLS
for tubes and buttons
$ 29.99
| /
R2 510 Tube Cleaning Tool
- Designed to be used with a drill to accelerate the cleaning process.
- Knurled grip
- Rubber O-Ring on bottom that screws against top cap
- Ratchet bottom for unscrewing tool from top cap
DIRECTIONS: Twist your top cap counterclockwise until the threads fall into place, then screw clockwise until securely tightened. It is important to make sure the cleaning tool is screwed flush to the top cap. If polishing, hold your Comp Cloth (or other cleaning rag) on the tube and turn your drill on. If you have severe scratches, try using a Scotch Brite pad in place of the Comp Cloth.
**Keep threads lubricated to prevent the tool from becoming stuck on your cap. Do not cross thread while screwing tool to the cap.
As always with plated tubes- refer to our Plating Policy for cleaning instructions.
Button Cleaning Tool
Compatible ONLY with AV Buttons
Made to chuck in a hand drill to speed up the button cleaning and polishing process
DIRECTIONS: Do not over tighten the button to the tool. If the button doesn't seem to fit the tool, don't force it. Use plenty of 3 in 1 oil on all threads before using.