Cleaning + Polishing Supplies

Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies
Cleaning + Polishing Supplies

Cleaning + Polishing Supplies

Regular price $ 10.99
/
  • Worldwide 2-3 day shipping
  • Authenticity guaranteed
  • Secure payments

Comp Cloth | Yellow: These cloths are made to be used with brass and copper items. Not for use with any items that are plated, anodized, coated, or have patina.

Polishing Cloth | Blue: These jewelry safe, soft cleaning cloths are made to polish rhodium plating, gold plating and solid silver. This cloth removes surface dirt and finger prints with ease. It is recommended to clean your silver or plated items after each use to avoid surface build up and oxidation.

R2 510 Tube Cleaning Tool

  • Designed to be used with a drill to accelerate the cleaning process.
  • Knurled grip
  • Rubber O-Ring on bottom that screws against top cap 
  • Ratchet bottom for unscrewing tool from top cap

DIRECTIONS: Twist your top cap counterclockwise until the threads fall into place, then screw clockwise until securely tightened. It is important to make sure the cleaning tool is screwed flush to the top cap. If polishing, hold your Comp Cloth (or other cleaning rag) on the tube and turn your drill on. If you have severe scratches, try using a Scotch Brite pad in place of the Comp Cloth.

**Keep threads lubricated to prevent the tool from becoming stuck on your cap. Do not cross thread while screwing tool to the cap.
As always with plated tubes- refer to our Plating Policy for cleaning instructions.

Button Cleaning Tool

Compatible ONLY with AV Buttons
Made to chuck in a hand drill to speed up the button cleaning and polishing process

DIRECTIONS: Do not over tighten the button to the tool. If the button doesn't seem to fit the tool, don't force it. Use plenty of 3 in 1 oil on all threads before using.

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.